Coherence and blanket implementations

A package may implement a trait for a type only if it owns the type, the trait, or a type named as an argument of the trait, and two implementations of one trait may never overlap.

Coherence is the rule that makes Type.member and value.member() mean one thing everywhere: for one trait and one type, there is at most one implementation in the whole program, and every package can decide which one without looking at the others.

Example#

trait Loud {
  fn shout(): String
}

type Robot {
  name: String
}

extend Robot with Loud {
  fn shout(): String {
    "{name.toUpperCase()}!"
  }
}

print Robot("wall-e").shout()

Syntax#

extend <Type> with <Trait> { ... }                          owns Type, or owns Trait
extend <Foreign> with <Trait><Mine> { ... }                  owns a type named as an argument of the trait
extend<Source, Target> Source with <Trait><Target> where <bounds> { ... }   a blanket implementation, owns Trait

Rules#

extend X with Trait needs your package to own X or Trait. Owning means declaring it: Robot above is declared in the same package as the extend, so the implementation is coherent even though Loud could belong to anybody.
Or a type of yours named as an argument of the trait. extend Float64 with From<Celsius> is coherent in the package that declares Celsius: neither Float64 nor From is yours, but Celsius is, and this is how a package converts its own type into a foreign one. The implementation still has exactly one possible author - the owner of Celsius reaches it this way, the owners of Float64 and of From through rule 1, and a fourth package owns none of the three.
```
type Celsius {
  degrees: Float
}

extend Float64 with From<Celsius> {
  static fn from(value: Celsius): Float64 {
    value.degrees
  }
}

const degrees: Float64 = Float64.from Celsius(21.5)
print degrees
```
Only the top level of an argument counts, and only a named type. From<List<Celsius>> is not yours: an argument that merely contains an owned type somewhere inside would let one package claim an implementation through a nesting another package wrote.

None of the three being yours is an error, named exactly. Int64 is std/number's and Show is std/core's, so a third package can implement neither for the other.

Kompiliert nicht

extend UInt8 with Negate {
  fn negate(): UInt8 {
    self
  }
}
// error: `extend UInt8 with Negate`: neither `UInt8` nor `Negate` belongs to this package

Where the trait has arguments, the note names the third way in as well:

Kompiliert nicht

extend Float64 with From<Int8> {
  static fn from(value: Int8): Float64 {
    1.0
  }
}
// error: `extend Float64 with From<Int8>`: neither `Float64` nor `From<Int8>` belongs to this package

Two implementations of one trait for the same type may never overlap, even inside one package. A type that already has a trait from its declaration cannot get it again from an extend.

Kompiliert nicht

trait Loud {
  fn shout(): String
}

type Robot with Loud {
  fn shout(): String {
    "BEEP"
  }
}

extend Robot with Loud {
  fn shout(): String {
    "BOOP"
  }
}
// error: `Robot` already implements `Loud`

An implementation for a trait covers every type of that trait, so it overlaps with the one such a type writes itself: a Square would answer describe with its own member, and the same value seen as a Shape with the extension's - what a call does would depend on the static type it is made through. The type's own stays the answer, and the message stands at the extend.

Kompiliert nicht

trait Shape {
  fn area(): Float
}

trait Describe {
  fn describe(): String
}

extend Shape with Describe {
  fn describe(): String {
    "some shape"
  }
}

type Square with Shape, Describe {
  side: Float

  fn area(): Float {
    side * side
  }

  fn describe(): String {
    "a square"
  }
}
// error: `Square` implements `Describe` itself, and it is a `Shape`

A blanket implementation's target is a bare type parameter (extend<Source, Target> Source with Into<Target> where Target: From<Source>), which covers every type. It is coherent only when your package owns the trait: it covers every type, so no owned type and no owned argument narrows it to a line only you could write.
Disjointness is proved only by different target heads, never by bounds. Two implementations of Show for List<Item> and for Map<Key, Value> are disjoint because List and Map are different heads. Two blanket implementations of one trait are never disjoint this way, so a package may write at most one blanket implementation of a trait it owns, however its where clause is written.
A trait that has a blanket implementation is not implemented by hand, and the message says which one to write instead. TryInto comes from TryFrom for every type, so writing it directly overlaps the blanket, and the note is built from the blanket's own where clause with your types put in. Into is a rule of its own: an implementation of it anywhere but in its one blanket is refused whatever it overlaps, with the From to write - From<Source> for the target, which coherence allows wherever it would allow the Into, because the package of the source may name it as the argument of From (rule 4).
Kompiliert nicht
```
type Celsius {
  degrees: Float
}

extend Celsius with Into<Float64> {
  fn into(): Float64 {
    degrees
  }
}
// error: Implement `From<Celsius>` for `Float64` instead; `Into` comes from it
```

One trait may stand twice in a with list, and then each instantiation needs a body of its own. Two instantiations do not overlap - Multiply<Board, Board> beside Multiply<Int, Board> is how a type overloads over a trait argument - but a type has one namespace of members, so the body the type writes is the implementation of one of them and of no other. The form that has a body per implementation is extend.

Kompiliert nicht

trait Draw<Surface> {
  fn draw(on: Surface): Int
}

type Paper {
  weight: Int
}

type Screen {
  pixels: Int
}

type Sketch with Draw<Paper>, Draw<Screen> {
  ink: Int

  fn draw(on: Paper): Int {
    ink
  }
}
// error: `Sketch` comes with `Draw` more than once, and `draw` is the body of the first one

trait Draw<Surface> {
  fn draw(on: Surface): Int
}

type Paper {
  weight: Int
}

type Screen {
  pixels: Int
}

type Sketch with Draw<Paper> {
  ink: Int

  fn draw(on: Paper): Int {
    ink
  }
}

extend Sketch with Draw<Screen> {
  fn draw(on: Screen): Int {
    ink * 2
  }
}

print Sketch(1).ink

Coherence decides which implementation exists; the file decides which member names it can write. An implementation is unique in the program either way, and nothing about dispatch depends on an import - but the members a trait puts on a type it does not own are only nameable where the trait itself is a name of the file, and a trait-less extend of a foreign type is nameable only where the file imported the member. See extend for both halves.

What this is not#

Coherence is not "last import wins". There is no shadowing between implementations: a second implementation of a trait a type already has is a compile error at the extend, not a silent replacement.

And visibility is not coherence. A member that this file cannot name still exists, is still the one implementation in the program, and is still what a generic function with the right bound calls. The import decides what this file may write, never what the program means.

trait Loud {
  fn shout(): String
}

type Robot {
  name: String
}

extend Robot with Loud {
  fn shout(): String {
    "{name.toUpperCase()}!"
  }
}

print Robot("wall-e").shout()

Kompiliert nicht

trait Loud {
  fn shout(): String
}

type Robot {
  name: String
}

extend Robot with Loud {
  fn shout(): String {
    "{name.toUpperCase()}!"
  }
}

extend Robot with Loud {
  fn shout(): String {
    "BOOP"
  }
}
// error: `Robot` already implements `Loud`

The second extend is rejected at its own line, not silently ignored and not silently replacing the first - so there is nothing to work around by writing the extensions in a particular order or a particular file.

extend - adding members afterwards, and what only the declaration can add.
Traits - with at the declaration, and coherence in one sentence.
Trait intersections - combining traits in a type position, which is unrelated to owning one.

Coherence and blanket implementations

Example#

Syntax#

Rules#

What this is not#

Related#